Augmenting Off-the-Shelf Grippers with Tactile Sensing

The development of tactile sensing and its fusion with computer vision is expected to enhance robotic systems in handling complex tasks like deformable object manipulation. However, readily available industrial grippers typically lack tactile feedback, which has led researchers to develop and integrate their own tactile sensors. This has resulted in a wide range of sensor hardware, making it difficult to compare performance between different systems. We highlight the value of accessible open-source sensors and present a set of fingertips specifically designed for fine object manipulation, with readily interpretable data outputs. The fingertips are validated through two difficult tasks: cloth edge tracing and cable tracing. Videos of these demonstrations, as well as design files and readout code can be found at https://github.com/RemkoPr/icra-2023-workshop-tactile-fingertips.Comment: Project repo: https://github.com/RemkoPr/icra-2023-workshop-tactile-fingertip

Simpler learning of robotic manipulation of clothing by utilizing DIY smart textile technology

Deformable objects such as ropes, wires, and clothing are omnipresent in society and industry but are little researched in robotics research. This is due to the infinite amount of possible state configurations caused by the deformations of the deformable object. Engineered approaches try to cope with this by implementing highly complex operations in order to estimate the state of the deformable object. This complexity can be circumvented by utilizing learning-based approaches, such as reinforcement learning, which can deal with the intrinsic high-dimensional state space of deformable objects. However, the reward function in reinforcement learning needs to measure the state configuration of the highly deformable object. Vision-based reward functions are difficult to implement, given the high dimensionality of the state and complex dynamic behavior. In this work, we propose the consideration of concepts beyond vision and incorporate other modalities which can be extracted from deformable objects. By integrating tactile sensor cells into a textile piece, proprioceptive capabilities are gained that are valuable as they provide a reward function to a reinforcement learning agent. We demonstrate on a low-cost dual robotic arm setup that a physical agent can learn on a single CPU core to fold a rectangular patch of textile in the real world based on a learned reward function from tactile information

Augmenting off-the-shelf grippers with tactile sensing

The development of tactile sensing and its fusion with computer vision is expected to enhance robotic systems in handling complex tasks like deformable object manipulation. However, readily available industrial grippers typically lack tactile feedback, which has led researchers to develop and integrate their own tactile sensors. This has resulted in a wide range of sensor hardware, making it difficult to compare performance between different systems. We highlight the value of accessible open-source sensors and present a set of fingertips specifically designed for fine object manipulation, with readily interpretable data outputs. The fingertips are validated through two difficult tasks: cloth edge tracing and cable tracing. Videos of these demonstrations, as well as design files and readout code can be found at https://github.com/RemkoPr/icra-2023-workshop-tactile-fingertips

Seamless Integration of Tactile Sensors for Cobots

The development of tactile sensing is expected to enhance robotic systems in handling complex objects like deformables or reflective materials. However, readily available industrial grippers generally lack tactile feedback, which has led researchers to develop their own tactile sensors, resulting in a wide range of sensor hardware. Reading data from these sensors poses an integration challenge: either external wires must be routed along the robotic arm, or a wireless processing unit has to be fixed to the robot, increasing its size. We have developed a microcontroller-based sensor readout solution that seamlessly integrates with Robotiq grippers. Our Arduino compatible design takes away a major part of the integration complexity of tactile sensors and can serve as a valuable accelerator of research in the field. Design files and installation instructions can be found at https://github.com/RemkoPr/airo-halberd

UnfoldIR : tactile robotic unfolding of cloth

Robotic unfolding of cloth is challenging due to the wide range of textile materials and their ability to deform in unpredictable ways. Previous work has focused almost exclusively on visual feedback to solve this task. We present UnfoldIR ("unfolder"), a dual-arm robotic system relying on infrared (IR) tactile sensing and cloth manipulation heuristics to achieve in-air unfolding of randomly crumpled rectangular textiles by means of edge tracing. The system achieves $>$85% coverage on multiple textiles of different sizes and textures. After unfolding, at least three corners are visible in 83.3 up to 94.7% of cases. Given these strong "tactile-only" results, we argue that the fusion of both tactile and visual sensing can bring cloth unfolding to a new level of performance

An on-body antenna for control of a wireless prosthesis in the 2.45 GHz industrial scientific and medical frequency band

Electronic prostheses require a communication link to other on-body nodes, for example, for control signal extraction. This link can be made wireless to improve user experience compared to wired solutions. Even though ample on-body communication techniques have been described for wireless body area networks, in prosthetics, the efficiency of wireless links is often neglected, in particular when radio frequency (RF) antennas are used. This work aims to show the benefit of on-body RF antenna design for prosthetics, by developing a dedicated antenna for use in a lower arm prosthesis. Additionally, this work tries to fill a gap in literature, where some antennas for dedicated on-body RF communication are presented, but no antennas specific for communication along the arm exist. To this aim, numerical simulations are performed using a cylindrically layered arm model to design a novel, electrically small, capacitively loaded, meandered, 2.45 GHz monopole antenna. The antenna is fabricated using 3D printed polylactic acid and validated both in a static human arm channel and in a dynamic setting, where the human subject performs various tasks. This antenna outperforms an off-the-shelf printed circuit board (PCB) antenna by 18 dB and a rectangular patch antenna by 4 dB in terms of link budget at a separation distance of 20 cm, both in line of sight and non-LOS path loss experiments. Additionally, while performing four commonplace activities, the average power received increased by 20 dB in an on-body link established between two of our novel antennas rather than two of the PCB antennas. These results will aid in the development of wireless prostheses used by a growing number of amputees

Modular piezoresistive smart textile for state estimation of cloths

Smart textiles have found numerous applications ranging from health monitoring to smart homes. Their main allure is their flexibility, which allows for seamless integration of sensing in everyday objects like clothing. The application domain also includes robotics; smart textiles have been used to improve human-robot interaction, to solve the problem of state estimation of soft robots, and for state estimation to enable learning of robotic manipulation of textiles. The latter application provides an alternative to computationally expensive vision-based pipelines and we believe it is the key to accelerate robotic learning of textile manipulation. Current smart textiles, however, maintain wired connections to external units, which impedes robotic manipulation, and lack modularity to facilitate state estimation of large cloths. In this work, we propose an open-source, fully wireless, highly flexible, light, and modular version of a piezoresistive smart textile. Its output stability was experimentally quantified and determined to be sufficient for classification tasks. Its functionality as a state sensor for larger cloths was also verified in a classification task where two of the smart textiles were sewn onto a piece of clothing of which three states are defined. The modular smart textile system was able to recognize these states with average per-class F1-scores ranging from 85.7 to 94.6% with a basic linear classifier